Using onion dehydrator, the dehydrated onion flakes can be makde into powder, how to dry the onion is very important.Slicing the onions 3mm, drying onions in the oven at 60℃ ,after 4-6hours, the dried onions come out
Onion dehydrator dry onions ,which are used to make powder by most clients. How to dry onions and also remain the nutrition? It depends on the onion drying machine and drying experience. The TSIX onion dehydrator dry fresh onion at low and middle temperatures, which dry the onion better. The dried onion do not change any of its nutritional value. The scent of the onion is preserved and the taste is better.
1.Wash the onion to make sure that the onion is clean.
2.Slice the onion into small pieces about 5-8mm.
3.Put the onion flakes in clean water for a few mins.
4.Put the onion flaks on the trays ,then put the trays into the TSIX Onion Dryer
5.Set the temperature at 40-60℃, and the humidity at 10%.
6.After 4-8 hours drying, you can open the door of the dehydrator to check if the dried onion can be dried reach your demand.
If want the dried flakes more crisp, the drying time can last longer.Different onion thickness will have different dehydrating time, more thinner, the dehydrating time will be shorter.
How does the Heat Pump Dryer Work?
TSIX heat pump dryer is the heat pump to get high temperature. The
compressor makes the coolant as high temp. and high pressure gas, it
releases the heating energy and becomes liquid when pass
the condenser with the fan running,
this heating energy goes to raise up the air temperature at the drying room. The
water inside of the goods to be dried becomes steam by the hot air, and this
steam is taken away by the exhaust system,
the goods will be tried by doing that again and again.
We have the heating-reuse system to heat up the refresh air from outside, that
can save energy of preheating the fresh air about 60% - 70%.
The Components of TSIX Drying Equipment
A whole drying equipment contains dryer, drying chamber, fan wall with fans, trolleys and trays
Heat Pump Dryer Drying Room Fall Wall
Trolley Mesh Tray
The Components of Heat Pump Dryer
The heat pump dryer is composed of condenser, heat exchanger, electronic expansion valve, PLC controller, compressor etc
Heat Pump Dryer Components of Heat Pump Dryer